ABOUT Oppo Realme C3
Realme C3 has a dual rear camera setup of a 12MP (wide, f/1.8) + a 2MP (depth, f/2.4) lens with PDAF, HDR, Panorama, an LED flash, etc. While the front features a 5MP (wide, f/2.4) selfie camera with HDR, Panorama mode, and supports 1080p@30fps video recording.
It comes with a 6.5-inches IPS LCD display with HD+ (720×1560 pixels) resolution, a 20:9 aspect ratio, and a Corning Gorilla Glass 3 protection. The handset runs on Android 10 with Realme UI 1.0 out-of-the-box. It’s equipped with an octa-core MediaTek Helion G70 SoC, paired with Mali-G52 2EEMC2 GPU, 2GB/3GB/4GB of RAM, and 32GB/64GB of internal storage options (a dedicated MicroSD card slot).
In terms of the connectivity options, the device has a 3.5mm audio jack, Wi-Fi 802.11 b/g/n, Bluetooth 5.0, GPS, A-GPS, GLONASS, BDS, FM Radio, MicroUSB 2.0, USB OTG, etc. While the handset sports a huge 5,000mAh battery with 10W charging. It has a few sensors like an accelerometer, proximity, a compass sensor, etc.
Important Note (before Flash File)
- Download and install any flash tool
- Download the firmware of your phone
- Install USB driver
- Take a backup of your data
- Connect your phone with a PC
Instruction Before Install:
After downloading the firmware file for Realme C3, you need to use SP Flash Tool to flash the firmware. If you are doing it for the first time then don’t worry.
Before Flashing Note:
Your Android Device must have At least 35 to 40 Percent of Battery to Perform The Complete Flashing Process.
Installation Guide For Realme C3 Flash Files:
Step 1: Download & Install Up to Date Spreadtrum USB Driver on your Laptop or Computer. If your PC Already has USB Driver Installed then Just Skip this Step.
Step 2: Download The Latest Stock ROM (.Pac) for your Android Phone.
Step 3: Download & extract The Spreadtrum Upgrade Flash Tool to your PC or Computer. After extracting the Zip File, you will able to see the following files like Below Screen:
Step 4: Now, Run The UpgradeDownload.exe. in your Computer From Folder.
Step 5: Once Spreadtrum Upgrade Flashing Tool SPD is Completely Started, Just Connect your Android Device to the computer or Laptop (Confirm That Your Smartphone is switched off).
Step 6: Once your Android Smartphone is successfully connected with Your Computer, Now Press Load Packed Option And add the .Pac ROM flash file (which you downloaded as .Pac).
Step 7: After successfully added the. Pac The Firmware file in Spreadtrum SPD Upgrade Flashing Tool, Now Press the Start Downloading Option to Begin the Flashing process.
Step 8: During the Flashing Process your Device will restart automatically. Once ROM Flashing Process is completed, you will see the Green Passed Pop-up Window in The SPD Spreadtrum Upgrade Tool Screen.
Step 9: Now Congratulation you have successfully flashed your Device to The latest Version using with SPD Spreadtrum Upgrade Tool. Now Go to Settings > About Phone > Check firmware version & ENJOY.
Download Oppo Realme C3 Stock Firmware
Download Now
We wish you have to download the flash files easily. If download links are not working or you are unable to get the firmware from this page, you can contact us. We will help you soon.
0 comments:
Post a Comment