The latest firmware of iPhone 8 plus is available on this page for free download. Flashing of the phone does at that stage if the phone is working slow or completely break due to its firmware.
So at that moment, you will need to flash your phone by using its latest firmware. You can download it free without the password. It will allow you to update your iPhone through iTunes on macOS and Windows.
The Benefit Of iPhone 8 Plus Firmware:
- Flash Stock To Unbrick your iPhone 8 Plus
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade iPhone 8 Plus
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter on iPhone 8 Plus
- By flashing Stock ROM, you can fix software issues.
- Revert back to stock to get your warranty.
Note: Before start downloading in the Safari browser make sure to disable the auto unzip feature. Or you can download via chrome or any other browser. Always ensure to take a backup from your IPSW iPhone 8 Plus mobile phone data before flashing.
iPhone Flash Tool Supported Windows OS
- Windows XP
- Windows 10
- Windows 7
- Windows 8
Pre-Requirement To Flash iPhone 8 Plus Firmware:
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data. such as call logs, SMS, and other data, is to if something goes wrong, your data is not affected.
How To Install iPhone 8 Plus firmware:
- Extract And Run SP flash tool.
- Install MTK android USB drivers.
- Then download iPhone 8 Plus Clone Firmware.
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into the charging socket.
- Now open SP flash tool.exe.
- When the SP flash tool opens, go to the download button in the SP flash tool.
- In the download tab, click on the scatter load button.
- After locating the scatter tab, click on the download button.
- Now connect your smartphone with a USB cable and press the volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- When flashing is completed, a green ring will appear in the SP flash tool.
- Close the SP flash tool on your computer and unplug the phone.
- Power on the phone and enjoy it.
- After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
0 comments:
Post a Comment